Washer Not Draining? Here’s What to Do!

6/11/20242 min read

Front panel of a washer is removed for pump repair
Front panel of a washer is removed for pump repair

Are you dealing with a washer that refuses to drain, leaving your laundry in a soggy mess? Fear not! CanFix Appliance Repair is here to guide you through troubleshooting and fixing this common issue. As your go-to appliance repair specialists, we're committed to providing helpful tips through our daily blog posts. Here’s a step-by-step guide to help you get your washer back in action.

1. Check the Drain Hose

  • Ensure the drain hose is not kinked or blocked. Straighten out any kinks and remove any obstructions that might be preventing proper drainage.

2. Inspect the Drain Pump

  • The drain pump is responsible for removing water from the washer. Check for any clogs or debris that might be hindering its operation. Clean or replace the drain pump as needed.

3. Verify the Lid Switch

  • Some washers have a lid switch that prevents the washer from draining if the lid is open. Make sure the lid is securely closed during the draining cycle. If the switch is faulty, it may need to be replaced.

4. Clean the Filter

  • Many washers have a filter or trap that catches debris to prevent it from clogging the drain pump. Locate the filter and clean it out thoroughly.

5. Inspect the Drainage Path

  • Check for any blockages in the drainage path, including the drain pipe and the sink or drain where the washer empties. Clear any obstructions to ensure proper drainage.

6. Test the Drain Pump

  • Manually test the drain pump to ensure it’s working correctly. Refer to your washer’s manual for instructions on how to do this.

7. Professional Assistance

  • If you’ve tried these steps and your washer still isn’t draining, it may be time to seek professional help. CanFix Appliance Repair offers expert washer repair services across Vancouver, East Vancouver, Burnaby, New Westminster, Surrey, Delta, Richmond, Coquitlam, and Port Coquitlam.

Safety Tips

  • Always unplug the washer before inspecting or repairing.

  • Exercise caution when working with electrical appliances and water.

By following these steps, you can troubleshoot and resolve common issues causing your washer not to drain properly. And remember, if you need expert assistance, CanFix Appliance Repair is just a call away!

For more tips on appliance maintenance and repair, follow our daily blog posts! Contact CanFix Appliance Repair for professional washer repair in Vancouver, East Vancouver, Burnaby, New Westminster, Surrey, Delta, Richmond, Coquitlam, and Port Coquitlam.

#ApplianceRepairVancouver #WasherRepair #HomeMaintenance #ApplianceRepairBurnaby #CanFixApplianceRepair